NVIVN 3D Printer, Desktop FDM 3D Printer, Build Size with Direct Extruder PC Spring Steel Printing Platform, Can Print…

Specification:
Modeling Technology: FDM
Printer size: 487x453x622mm
Machine net weight: 9.1Kg
Build size: 220*220*270mm
Printing accuracy: ±0.1mm
Printing speed: up to 150mm/s
Printing platform: PC spring steel plate
Filament diameter: 1.75mm
Maximum hot bed temperature: 100°C
Filament Supported: PLA/TPU/PETG/ABS
Printing layer thickness: 0.05-0.35mm
Nozzle diameter: 0.4mm
Number of nozzles: 1
Extruder Type: “Sprite” Direct Extruder
Filament sensor: support
Resume Printing: Supported
Rated voltage: 115/230v 50/60Hz 4.5/2.5A
Motherboard: 32-bit silent motherboard
Software language: Chinese/English
Supported file formats: STL/OBJ/AMF
Extruder gear ratio: 1:3.5
Screen: knob color screen
Automatic Bed Leveling: CR Touch
Printing method: Type-C USB/SD card
Power rating: 350 watts
Maximum nozzle temperature: 260°C
Slicing software: Slicer/Cura/Repetier-Host/Simplify3D
Package size: 54x51x26cm/21.3 x 20.1 x 10.2in
Packed gross weight: 11.2kg/24.7lbd

Our brand new self-developed direct double gear extruder has two chrome steel gears with a gear ratio of 1:3.5. The thrust of the extruder is as high as 80N, so that the filament enters and exits smoothly without slipping
96% of the printer body is pre-installed, only 6 steps are required, and printer maintenance is simple and easy. With a wealth of laser engraving and LED light preset interfaces, it can print PLA, TPU, PETG, ABS, etc., allowing you to unleash your creativity
High-precision dual Z-axis, low-noise operation, adopts Z-axis dual-screw + Z-axis dual-motor design, reducing the possibility of lines and raised lines on the side of the printing, thereby improving the printing quality
Automatic leveling device, automatic leveling technology, easy to use, intelligent leveling system can automatically compensate the printing height at different points of the hotbed. Innovative PC-coated printing platform for good adhesion
Continuous and reliable print and filament detector with the ability to detect flame exhaustion in case of wire break/power failure and resume printing after recovery. By accurately recording the print data in the event of a power outage/filament exhaustion or disconnection